TM10-3930-660-20 6-3. MUFFLER AND TAIL PIPE    REPLACE (Cont‘d) b. 3. Remove muffler (5) and tail pipe (6) as an assembly. IF NECESSARY, REMOVE TAIL PIPE (6). a. Loosen clamp (10). b. Remove tail pipe (6) from muffler (5). INSTALLATION 1. IF NECESSARY, INSTALL TAIL PIPE (6). a. Position clamp (10) and tail pipe (6) on muffler (5). b. Tighten two clamps (10). 20 INSTALL MUFFLER (5) AND TAIL PIPE (6) AS a. b. c. AN  ASSEMBLY. Loosen two clamps (7) and place clamps (7) around muffler (5). Position and support muffler (5) and tail pipe (6) as an assembly next to engine mounts (8) and (9). Slide clamps (7) over engine mounts (8) and (9). CAUTION Springs on clamps (7) must not be fully compressed or damage to muffler (5) may result. d. Tighten two clamps (7). 6-3