TM10-3930-660-20 5-22. ACCELERATOR PEDAL ASSEMBLY -   RBPLACE/REPAIR (Cont’ d) DISASSEMBLY DISASSEMBLE ACCELERATOR PEDAL ASSEMBLY (4). a. b. c. d. e. f. 9. h. i. j. Remove  screw (5) , flatwasher (6) , and nut (7) , securing cable support bracket (8) to hanger plate  assembly  (9)  . Remove pin (10) and spring clip (11) securing pushrod (12), to lever  assembly  (13)  . Remove hex bolt (14) and travel stop (15) from lever assembly (13) . Remove circlip (16), nyliner bearing (17), lever assembly (13), spring (18), and nyliner bearing (19), from shaft of hanger plate assembly  (9). Remove two spring clips (20) and and long pin (21) securing block assembly (22) and pushrod (12) to pedal  (23). Remove pushrod (12) from block assembly  (22). Remove nut (24), lockwasher (25), U-bolt (26) and bracket (26A) securing hanger plate assembly (9) to pedal base (27). Remove spring clip (28) and pivot pin (29) securing pedal (23) to pedal base (27). Remove bellows (30) from pedal base (27). Loosen jamnut (31) and remove capscrew (32) and jamnut (31) from pedal  base  (27). 5-49