TM10-3930-660-20 5-21. ACCELERATOR CABLE -  REPLACE/ADJUST (Cont’d) 2. REMOVE ACCELERATOR CABLE (1) AT FUEL INJECTION  PUMP  (1.1). a. b. Remove cotter pin (12) and clevis pin (13) securing clevis (14). Discard cotter pin (12). Loosen nut (16) and starwasher (17). Remove cable (1). Note routing of accelerator cable (1) on vehicle frame for use during installation. 3. REMOVE ACCELERATOR CABLE (1) FROM VEHICLE FRAME. INSTALLATION 1. 2* POSITION ACCELERATOR CABLE (1) ON VEHICLE FRAME AS NOTED DURING REMOVAL. INSTALL ACCELERATOR CABLE (1) AT FUEL INJECTION  PUMP  (11). a. Secure clevis (14) of cable (1) to linkage (15) with clevis pin (13) and new cotter pin (12). Position starwasher (17) in front of bracket  (18). b. Position cable (1) on bracket (18) and secure with nut (16) and starwasher  (17). 5-45