TM10-3930-660-20 5-21. ACCELERATOR  CABLE   -  REPLACE/ADJUST This task covers: a. Removal b. Installation c. Adjustment Initial Setup Tools Materials/Parts Tool Kit, Automotive Mechanics — _ Cotter  Pin  (12) Locknuts  (8) Equipment  Condition Vehicle parked on level ground. WARNING Do not smoke or allow open flame or sparks in the vicinity while working on any part of the fuel system. Diesel fuel is highly flammable and can cause injury or death if accidentally ignited. 1.   REMOVE ACCELERATOR CABLE (1) AT ACCELERATOR PEDAL (2). a. Remove spring clip (3) and clevis pin (4) securing clevis (5) to linkage  (6). b. Remove spring (7) from linkage (6) c. Remove two locknuts (8), two flatwashers (9), and cable clamp (10) . Discard locknuts (8). d. Remove cable (1). 5-44