| |
TM10-3930-660-20
5-20. ETHER START CARTRIDGE MOUNTING BRACKET - REPLACE
This task covers:
a. Removal
b. Installation
Initial Setup
Tools
Tool Kit, Automotive Mechanics
Materials/Parts
.
—
Lockwashers (11)
Equipment Condition
Ether cartridge removed) para. 5-18.
Negative battery cable disconnected,
para. 8-44.
1.
2.
3.
DISCONNECT ELECTRICAL WIRING.
a.
b.
Disconnect the male (1) and female
(2) connectors on the wiring
attaching bracket (3) to thermostat
(4).
Disconnect the male (5) and
female (6) connectors on the
wiring from bracket (3) to engine
harness (7).
REMOVE HOSE (8) AND ELBOW (9) AT BASE
OF BRACKET (3).
REMOVE BRACKET (3) BY REMOVING TWO
CAPSCREWS (10) AND TWO LOCKWASHERS
(11). DISCARD LOCKWASHERS (11).
INSTALLATION
1.
2
3.
INSTALL BRACKET (3).
Position bracket (3) on vehicle
and secure with two new lockwashers
(11) and two capscrews (10).
SCREW ELBOW (9) ONTO BRACKET (3).
ATTACH HOSE (8) TO ELBOW (9).
CONNECT ELECTRICAL WIRING.
4.
a. Connect male (1) and female (2) ends
on the wiring from bracket (3) to
thermostat (4).
5.
b. Connect male (5) and female (6)
ends on the wiring from bracket
(3) to engine wiring harness (7).
CONNECT NEGATIVE BATTERY CABLE, PARA.
8-44.
INSTALL ETHER CARTRIDGE, PARA. 5-18.
5-43
|
