| |
TM 10-3930-659-34
5-14. AXLE HOUSING AND PLANETARY CARRIER ASSEMBLY REPAIR (Con’t).
13.
Using puller kit, remove bearing cone (22) from axle housing (2).
14.
Using puller kit, remove sleeve (18) and two bearing cups (19 and 21) from axle housing (2).
15.
Remove Inner seal (20) from axle housing (2). Discard seal.
b. PLANETARY CARRIER DISASSEMBLY
1.
Remove retaining ring (30) from planetary carrier
housing (29).
NOTE
Mark gear components to aid during installation. DO
NOT mix components of one gear with components
of other gears.
2.
Using arbor press, press out shaft (26), gear
(24), two plates (23), and 33 roller bearings (25)
from planetary carrier housing (29).
3.
Repeat step 2 for other two gears (24).
4.
Remove shouldered washer (27) and washer
(28) from planetary carrier housing (29).
5-136
|
