| |
TM 10-3930-659-34
5-9. TRANSMISSION CONTROL VALVE MAINTENANCE (Con’t).
4.
Apply a light coat of lubricating oil to piston (86).
5.
Install piston (86) in valve block (31) with new
retaining ring (87).
6.
Apply a light coat of lubricating oil to piston (88).
CAUTION
Ensure that clip is installed in groove
of piston and in slot inside the face of
valve block. Con- trol or function of
clutch will fail to operate if clip is
improperly installed.
7.
Install piston (88) in valve block (31) with clip
(89).
8.
Apply a light coat of lubricating oil to piston (85)
and spring (84).
9.
Install spring (84) and piston (85) in valve block
(31).
5-71
|
