| |
TM 10-3930-659-34
2-26. MULTIMETER (Con’t).
NOTE
If digital readout will not zero properly, replace batteries and repeat zeroing procedure.
If digital readout will not zero after batteries have been replaced, notify your supervisor.
(1) Zero the Multimeter.
(a)
Set multimeter ON/OFF switch (4) to ON position.
(b)
Press OHMS FUNCTION switch (2).
(c)
Press LOWEST VOLTAGE/OHMS selector switch (6).
(d)
Touch black and red probes (8 and 9) together and check for a zero reading on digital
readout (7).
2-16
|
