TM 10-3930-659-34 4-29.  STARTER MOTOR REPAIR (Con’t). 13. Mark drive housing (28) and housing (9) to aid during assembly. 14. Remove three screws (32), drive housing (28), and preformed packing (27) from housing (9).  Discard preformed packing. 15. Remove bushing (29) from drive housing (28). 16. If cup (31) is damaged, remove cup and wick (30) from drive housing (28). 17. Remove retaining ring (26) and stop (25) from armature shaft (24). 18. Mark starter housing (4) and housing (9) to aid during assembly. NOTE Release drive assembly from lever of housing as parts are removed from starter housing. 19. Remove five screws (35), housing (9), drive assembly (34), seal (36), washer (37), and armature (33) from starter housing (4).  Discard seal. 4-116