| |
TM 10-3930-659-20
17-31. HYDRAULIC OIL RETURN FILTER ASSEMBLY REPLACEMENT.
This Task Covers:
a.
Filter Replacement
c.
Filter Head Installation
b.
Filter Head Removal
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Hydraulic reservoir drained (filter head replacement
• Hydraulic fluid (Item 18, Appendix C)
only) (see LO 10-3930-659-12).
• Rags (Item 27, Appendix C)
•
Left engine upper sideshield opened (see TM 10-
• Marker tags (Item 33, Appendix C)
3930-659-10).
• Five preformed packings
Tools/Test Equipment:
References:
•
General mechanic's tool kit (Item 44, Appendix F)
• LO 10-3930659-12
•
Adjustable wrench (Item 49, Appendix F)
• TM 10-3930-659-10
•
Pipe wrench, strap (Item 50, Appendix F)
NOTE
A suitable container should be used to catch any draining hydraulic fluid. Ensure that all
spills are properly cleaned.
a.
FILTER REPLACEMENT
1.
Remove hydraulic oil return filter element (1)
from hydraulic oil return filter head (2).
2.
Fill hydraulic oil return filter element (1) with
clean hydraulic fluid and install hydraulic oil
return filter element on hydraulic oil return filter
head (2).
TA707676
17-93
|
