| |
TM 10-3930-659-20
17-7.
FORKLIFT CONTROL VALVE LEVERS REPLACEMENT.
This task covers:
a.
Removal
c.
Adjustment
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Parking brake set (see TM 10-3930-659-10).
•
Seven locknuts
•
Right access door opened (see TM
10-3930-659-10).
•
Right side cab skirt removed (see paragraph 14-6).
References:
Tools/Test Equipment:
•
TM 10-3930-659-10
•
General mechanic's tool kit (Item 44, Appendix F)
a.
REMOVAL
NOTE
Locknut and screw on right side of
forklift truck should be removed first.
1.
Remove three locknuts (2), screws (4), and rod
end bearings (3) from forklift control valve (1).
Discard locknuts.
TA707625
17-21
|
