TM 10-3930-659-20 17-3. FORK/BRAKE HYDRAULIC PUMP STANDBY PRESSURE TEST (Con't). 2. Hold boot (2) of right brake pedal (1) with hand and    pump    left    brake    pedal    (4)    75    times. Release boot. 3. Remove  plug  (11)  and  preformed  packing  (10) from forklift control valve (7), Discard preformed packing. 4. Install hose (6) on forklift control valve (7). 5. Install pressure gage (8) on hose (6). 6. Start engine (see TM 10-3930-659-10) and note pressure reading on pressure gage (8).  Reading must be 2650-2750 psi (18272-18961 kPa). TA707616 17-11