TM 10-3930-659-20 16-9. WINDOW WASHER ASSEMBLY REPLACEMENT (Con't). 6. If removed, install plate (1) on engine frame (14) with two screws (13). NOTE Tank has two pumps, each located on opposite side of tank. 7. Install cap (4), two elbows (10 and 11), and pumps (7) on tank (3). 8. Install hose (9) on elbow (10) and pump (7). 9. Install hose (12) on elbow (11) and pump (7). 10. Install tank (3) on plate (1) with four screws (5) and nuts (15). 11. Install two hoses (2 and 8) on pumps (7). NOTE Install tie-down straps as necessary. 12. Connect two engine wiring harness connectors (6) to pumps (7). FOLLOW-ON TASKS: • Fill tank with windshield cleaning compound (see TM 10-3930-659-10). • Install cab recirculating filter (see paragraph 14-14). • Install lower dash cover (see paragraph 14-23). • Install cab skirts (see paragraph 14-6). • Install left engine lower sideshield (see paragraph 14-16). • Close right and left engine upper sideshields (see TM 10-3930-659-10). • Install conveyorized fork attachments on side of forklift truck (see paragraph 17-13). TA706993 16-32