TM 10-3930-659-20 12-5. SECONDARY STEERING PUMP, MOTOR, AND SOLENOID MAINTENANCE (Con't). 6. Remove   coupling   (34)    and    seal    (35)    from secondary  steering  pump  motor  (24).    Discard seal. c. ASSEMBLY 1. Install new seal (35) and coupling (34) on secondary steering pump motor (24). 2. Install new gasket (27) and secondary steering pump (28) on secondary steering pump motor (24) with four new lockwashers (29) and screws (30). 3. Install solenoid (7) on secondary steering pump motor (24) with new starwasher (31) and screw (32). 4. Install jumper wire (23) on secondary steering pump motor (24) with new lockwasher (26) and nut (25). 5. Install rubber boot (33) over nut (25). 6. Install jumper wire (23) on solenoid (7) with new lockwasher (21) and nut (22). 7. Install boot (20) over nut (22). 8. Install  secondary  steering  pump  motor  (24)  on plate  (14)  with  two  washers  (19)  and  screws (18). TA707561 12-19