TM 10-3930-659-20 10-3. PARKING BRAKE PEDAL AND HANDLE REPLACEMENT. This task covers: a. Removal b. Installation Initial Setup. Equipment Conditions: Materials/Parts: • Wheels chocked. • Two cotter pins • Parking brake cable removed from Tools/Test Equipment parking brake pedal (see paragraph 10-4). • General mechanic's tool kit (Item 44, Appendix F) a. REMOVAL 1. Loosen   nut   (5)   and   remove   handle   (6)   from release lever (9). 2. Remove nut (5) from release lever (9). 3. Remove   cotter   pin   (3)   and   release   lever   (9) from parking pawl (11).  Discard cotter pin. 4. Remove release lever (9) from bracket (4). 5. Remove  spring  (7),  washer  (8),  and  cotter  pin (11 from release lever (9).  Discard cotter pin. 6.          Remove  spring  (1)  from  two  pins  (2  and  12). TA706933 10-9