| |
TM 10-3930-659-20
7-3.
TRANSMISSION SHIFT RODS REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Materials/Parts:
•
Parking brake set (see TM 10-3930-659-10).
•
Two Indicator springpins
•
Steering wheel removed (see paragraph 12-2).
•
Two springpins
•
Transmission shift cables disconnected from
Personnel Required: Two
bell
References:
Tools/Test Equipment:
•
TM 10-3930-659-10
•
General mechanic's tool kit (Item 44, Appendix F)
•
Retaining ring pliers (Item 24, Appendix F)
a.
REMOVAL
1.
Move steering column to rearmost position (see TM 10-3930-659-10).
NOTE
•
Retaining ring cannot be removed from shaft until shaft Is
removed from cover.
•
Retaining ring can be accessed by reaching Into front of
cover.
2.
Remove retaining ring (4) from groove (10) and slide retaining ring onto shaft (3).
NOTE
Note position of ball and spring In cover to aid during Installation.
3.
Remove shaft (3) and retaining ring (4) from cover (2), and remove ball (6) and spring (5) from shaft.
4.
If damaged, remove knob (9), washer (8), and nut (7) from shaft (3).
7-8
|