| |
TM 10-3930-659-20
6-50.
SHUNT REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
Initial Setup
Equipment Conditions:
Materials/Parts:
•
Battery disconnect switch in OFF position (see
•
Marker tags (Item 33, Appendix C)
TM 10-3930-659-10).
•
Four lockwashers
•
Negative battery cables disconnected (see para-
graph 6-43).
Tools/Test Equipment:
•
Conveyorized fork attachments removed
•
General mechanic's tool kit (Item 44, Appendix F)
from side of forklift truck (see paragraph 17-13).
•
Right engine upper sideshield opened -
References:
(see TM 10-3930-659-10)
•
TM 10-3930-659-10
a.
REMOVAL
NOTE
All cables and wires should be tagged before removal. Refer to
paragraph 2-18 for tagging Instructions.
1.
Remove two screws (11), lockwashers (10), and cables (1) from shunt (6). Discard lockwashers.
6-167
|
