TM 10-3930-659-20 6-47. SLAVE RECEPTACLE REPLACEMENT (Con't). 4. Remove cap (13) from slave receptacle (18). 5. Remove four nuts (4), washers (5), screws (12), chain (11), and plastic Insulator (16) from slave receptacle (18). 6. Remove screw (15), lockwasher (14), and chain (11) from cap (13).  Discard lockwasher. CAUTION Slave receptacle connector should be tagged and position noted before removal.  Refer to paragraph 2-18 for tagging Instructions. Failure to Install slave receptacle In proper position may result in Improper polarity and damage to equipment. 7. Remove slave receptacle (18) and plastic insulator (17) from right engine lower sideshield (10). TA707840 6-162