| |
TM 10-3930-659-20
6-34.
AIR CLEANER RESTRICTION SENSOR REPLACEMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Equipment Conditions:
Materials/Parts:
• Battery disconnect switch in OFF position (see
•
One preformed packing
TM 10-3930-659-10).
• Left engine upper sideshield opened (see TM 10-
References:
•·
TM 10-3930-659-10
3930-659-10).
Tools/Test Equipment:
• General mechanic's tool kit (Item 44, Appendix F)
a.
REMOVAL
1.
Disconnect air cleaner restriction sensor (1) from engine wiring harness connector (6).
CAUTION
Wrench should be placed on hex flats to prevent damage to air cleaner
restriction sensor.
2.
Remove air cleaner restriction sensor (1) from pipe reducer (3).
3.
Remove preformed packing (2) from air cleaner sensor (1) Discard preformed packing.
4.
Remove pipe reducer (3) and elbow (4) from air cleaner (5).
b.
INSTALLATION
1.
Install elbow (4) and pipe reducer (3) on air cleaner (5).
2.
Install new preformed packing (2) on air cleaner restriction sensor (1).
CAUTION
Wrench should be placed on hex flats to prevent damage to air cleaner
restriction sensor.
3.
Install air cleaner restriction sensor (1) on pipe reducer (3).
4.
Connect air cleaner restriction sensor (1) to engine wiring harness connector (6).
6-132
|