| |
TM 10-3930-659-20
6-17.
LOAD CENTER WIRING HARNESS MAINTENANCE (Con't).
b.
REMOVAL
NOTE
Remove clamps as necessary.
1.
Disconnect fault monitor and dash wiring harness (1) from fault monitor and dash wiring harness
connector (2).
2.
Loosen
two
screws
(6)
and
remove
emergency
flasher
terminals
(7)
from
emergency flasher (5).
3.
Disconnect two 24-volt module connectors
(3) from 24-volt module (4).
TA707760
6-73
|
