| |
TM 10-3930-659-20
Section II. SERVICE UPON RECEIPT
Paragraph
Page
Number
Paragraph Title
Number
2-4
General .........................................................................................................
2-2
2-5
Inspection Instructions ....................................................................................
2-2
2-6
Servicing Instructions ....................................................................................
2-2
2-4.
GENERAL.
When a new, used, or reconditioned M544E Forklift Truck is first received, determine whether it has been
properly prepared for service and is in condition to perform its mission. Follow the inspection instructions In paragraph 2-
5 and servicing instructions in paragraph 2-6.
2-5.
INSPECTION INSTRUCTIONS.
a.
Read and follow all instructions on DD Form 1397.
b.
Remove all straps, plywood, tape, seals, wrapping, or any other shipping material.
WARNING
Dry cleaning solvent, P-D-680, Is toxic and flammable. Always
wear protective goggles and gloves, and use only In a well-
ventilated area. Avoid contact with skin, eyes, and clothes, and DO
NOT breathe vapors. DO NOT use near open flame or excessive
heat. The solvent's flash point Is 100°F-138°F (38°C-59°C). If you
become dizzy while using cleaning solvent, Immediately get fresh
air and medical help. If solvent contacts eyes, Immediately wash
your eyes and get medical aid.
c.
If any exterior parts are coated with rust preventive compound, remove with dry cleaning solvent (Item 31,
Appendix C) and rags (Item 27, Appendix C).
d.
Inspect the equipment for any damage incurred during shipment. Also check to see if the equipment has
been modified.
e.
Check the equipment against the packing slip to ensure that the shipment is complete. Report any
discrepancies on SF Form 364.
2-6.
SERVICING INSTRUCTIONS.
a.
Perform all Unit Maintenance PMCS. Schedule the next PMCS on DD Form 314.
b.
Perform all lubrication, regardless of interval, as described in LO 10-3930-659-12.
c.
Report any problems on DA Form 2404.
2-2
|