TM 10-3930-659-20 5-14.  FUEL TANK FILLER CAP AND STRAINER REPLACEMENT. This task covers: a. Removal b. Installation INITIAL SETUP: Equipment Conditions: Tools/Test Equipment: •    Battery disconnect switch in OFF position (see • Pipe wrench, strap (Item 50, Appendix F) TM 10-3930-659-10). •    Radiator grille door opened (see TM 10-3930- General Safety Instructions: 659-10). • DO NOT perform this procedure near fire, flames, or sparks. References: • TM 10-3930-659-10 WARNING Diesel fuel Is combustible.  DO NOT smoke or allow open flame near fuel tank. Failure   to   follow   this   warning   will   result   In   death   or   serious   Injury   to personnel.  If you are burned, Immediately seek medical aid. a. REMOVAL Remove fuel tank filler cap and strainer (1) from fuel tank (2). b. INSTALLATION Install fuel tank filler cap and strainer (1) in fuel tank (2). 5-38