TM 10-3930-659-20 5-9. AIR CLEANER MAINTENANCE (Con't). 7. If  loop  clamps  (12)  are  damaged,  remove  four nuts  (17),  washers  (21),  screws  (19),  and  two loop clamps from bracket (20). NOTE Perform  steps  8  through  10  only  if bracket is damaged. 8. Remove fuel primer pump (see paragraph 5- 12). 9. Remove  engine  starting  aid  bracket  (see  para- graph 5-22). 10. Remove  three  screws  (23),  washers  (24),  and bracket (20) from engine block (22). c. INSTALLATION NOTE Perform steps 1 through 3 only if bracket was removed. 1. Install bracket (20) on engine block (22) with three washers (24) and screws (23). 2. Install engine starting aid bracket (see paragraph 5-22). 3. Install fuel primer pump (see paragraph 5-12). 4. If removed, install two loop clamps (12) on bracket (20) with four screws (19), washers (21), and nuts (17).  Do not tighten nuts. TA706861 5-24