| |
TM 10-3930-659-20
22-8.
PREPARATION OF EQUIPMENT FOR AIR SHIPMENT.
This task covers:
a.
Removal
b.
Installation
INITIAL SETUP:
Equipment Conditions:
Materials/Parts:
• Counterweight removed (see paragraph 13-3).
•
Two lockwashers
• Cab door removed (see paragraph 14-2).
Personnel Required: Three
• Front windshield wiper arm removed (see
References:
paragraph 16-6).
•
TM 10-3930-659-10
Tools/Test Equipment:
• General mechanic's tool kit (Item 44, Appendix F)
• Wrecking bar (Item 4, Appendix F)
• Torque wrench, 0-600 lb.-ft. (item 53, Appendix F)
• Socket wrench set, X in. drive (Item 55, Appendix F)
a.
REMOVAL
1.
Remove two screws (2), lockwashers (3), and rear window wiper arm cover (4) from lower cab (8). Discard
lockwashers.
2.
Remove retainer (5) and pivot assembly (6) from rear window wiper arm (7).
3.
Remove rear window washer hose (1) from elbow (9).
22-6
|