| |
TM 10-3930-659-20
17-36. HYDRAULIC RESERVOIR REPLACEMENT.
This Task Covers:
a.
Removal
b.
Installation
Initial Setup:
Equipment Conditions:
Equipment Conditions (Con't):
•
Parking brake set (see TM 13930-659-10).
• Hydraulic reservoir drain valve and line removed
•
Frame locking bar Installed (see TM 10-3930-
(see paragraph 17-39).
659-10).
• Hydraulic oil level sight gage removed (see para-
•
Hydraulic reservoir drained (see LO 10-3930-
graph 19-1).
659-12).
•
Conveyorized fork attachments removed form side of
forklift truck (see paragraph 17-13).
Materials/Parts:
•
Engine upper sideshields removed (see para-
• Rags (item 27, Appendix C)
14-15).
• Marker tags (Item 33, Appendix C)
•
Right engine lower sideshield removed (see para•
• Fourteen preformed packings
graph 14-16).
•
Cab skirts remove (see paragraph 14-6).
•
Engine hood removed (see paragraph 14-6).
Tools/Test Equipment:
•
Secondary steering pump removed (see para
graph 12-5).
• General mechanic's tool kit (Item 44, Appendix F)
•
Hydraulic reservoir suction filter removed (see
• Adjustable wrench (Item 49, Appendix F)
paragraph 17-29).
•
Hydraulic reservoir breather filter removed (see
References:
paragraph 17-30).
• LO 10-3930-659-12
•
Hydraulic oil return filter assembly removed (see
• TM 10-3930-659-10
paragraph 17-31).
•
Hydraulic reservoir filler cap and cover removed (see
paragraph 17-35).
•
Hydraulic reservoir-to-oil return filter line and fittings
removed (see paragraph 17-37).
NOTE
•
All hoses should be tagged before removal. Refer to paragraph 2-18 for tagging
instructions.
•
A suitable container should be used to catch any draining hydraulic fluid. Ensure
that all spills are properly cleaned.
a.
REMOVAL
1.
Loosen clamp (7) and remove hose (8) from elbow (2).
2.
Remove four hoses (6) from connectors (4).
17-108
|