Quantcast Explanation of Columns (Sections II and Ill) (Conít). - TM-10-3930-657-24P_12
Share on Google+Share on FacebookShare on LinkedInShare on TwitterShare on DiggShare on Stumble Upon
TM  10-3930-657-24P 3. Explanation of Columns (Sections II and Ill) (Con’t). (3) Recoverability Code. Recoverability codes are assigned to items to indicate the disposition action on unserviceable items. The recoverability code is entered in the fifth position of the SMR code as follows: Code z o F H D L A Application/Explanation Nonreparable item. When unserviceable, condemn and dispose of the item at the level of maintenance shown in the 3d position of the SMR code. Reparable item. When uneconomically reparable, condemn and dis- pose of the item at unit maintenance or aviation unit level. Reparable item. When uneconomically reparable, condemn and dis- pose of the item at the direct support or aviation intermediate level. Reparable item. When uneconomically reparable, condemn and dis- pose of the item at the general support level. Reparable item. When beyond lower level repair capability, return to depot. Condemnation and disposal of item not authorized below depot level. Reparable item. Condemnation and disposal of item not authorized be- low specialized repair activity (SRA). Item  requires  special  handling  or  condemnation  procedures  because of specific reasons (e.g., precious metal content, high dollar value, critical material, or hazardous material). Refer to appropriate manuals/ directives  for  specific  instructions. c. CAGEC [Column (3)]. The Commercial and Government Entity (CAGE) Code (C)is a 5-digit alphanumeric code which is used to identify the manufacturer, distributor, or Government agency, etc., that supplies the item. NOTE When you use an NSN to requisition an item, the Item you receive may have a different part number from the part ordered. d. PART  NUMBER  [Column  (4)].  Indicates  the  primary  number  used  by  the  manufacturer  (individual, company, firm, corporation, or Government activity), which controls the design and characteristics of the item by means of its engineering drawings, specifications standards, and inspection requirements to identify an item or range of items. e.  DESCRIPTION  AND  USABLE  ON  CODE  (UOC)  [Column  (5)].  This  column  includes  the  following information: (1) The Federal item name and, when required, a minimum description to identify the item. (2)  Physical  security  classification.  Not  Applicable. (3) Items that are included in kits and sets are listed below the name of the kit or set on Figure KIT (4) Spare/repair parts that make up an assembled item are listed immediately following the assembled item line entry. (5) Part numbers for bulk materiels are referenced in this column in the line item entry for the item to be manufactured/fabricated. Change  1 4

Integrated Publishing, Inc.