TM 10-3930-653-14&P Organizational Preventive Maintenance Check and Services A-Annually H-Hours Item Interval Item To Be Inspected No. A H Procedure:  Check For And Repair, Fill Or Adjust As Necessary. NOTE Perform Operator/Crew PMCS prior to or in conjunction with Organization PMCS if: a.  There is a delay between the daily operation of the equipment and the Organization PMCS. b.  Regular operator is not assisting/participating. 1. ENGINE OIL 200 Drain oil and replace engine oil filter with truck on level surface (ref.   para 4-1-3-5(1), (2)).  Refill to bring oil level between "L" and "H" level on dipstick. 2. LUBRICATION 250 Perform all lubrication services (ref.  Section 2, TM 10-3930-653-14’P). Check for loose, bent or worn parts. 3. AIR CLEANER 250 Replace air cleaner (ref. para 4-1-3-4).  Clean and inspect rubber seal for damage. 4. FUEL FILTER 250 Remove filter element from fuel filter and clean (ref.  para 4-1-3-4(2)). Check for evidence of fuel leakage. 5. SPARK PLUGS 250 Check condition of individual spark plugs and wires.  Clean or replace; adjust to proper gap.  Tighten and torque 13 to 17 ft lb (ref. para 4-1-3-3(4)). 6. FAN BELT 250 Check fan belt for correct tension and damage (ref.  para 4-1-3-2(3)). 7. DISTRIBUTOR 250 a. Check condition of points.  Check or replace and adjust to proper gap (ref.  para 4-1-3-3(2), (6)). 250 b. Check ignition timing (ref.  para 4-1-3-3(3)). B-40