| |
TM 10-3930-653-14&P
CAUTION
It the pointer enters the red range, stop the operation
instantly and slow down engine speed to cool the coolant
and wait until the pointer goes into the green range.
ENGINE COOLANT TEMPERATURE GAUGE [6]
This gauge indicates the temperature of engine coolant.
Under normal conditions, the pointer should be in the
green range. ’f the pointer stays in the white range, idle
the engine until it enters the green range
SWITCHES
IGNITION SWITCH [7]
The key is a reversible type so the operator can easily
put it into the switch. Furthermore it is of the anti-restart
design.
CAUTION
1. Do not keep the starter switch in the "ON" position
while the engine is shut down. This results In a
discharged battery.
2 Do not keep the starter engaged for more than 15
seconds at a time. Wait about 20 seconds before
trying again
OFF
This is position at which the key is inserted or drawn out.
ON
The electric circuit is closed with the starter switch at ON
After the engine is started the key should return to this
position
START
As the key is placed in the "START" position, the starter
motor is engaged. When removing hand from key. it is
automatically returned to the "ON" position by spring
force.
LIGHT SWITCH [8]
This light switch can be pulled out three steps.
Stage
0
1st
2nd
3rd
Light-
OFF
Tail Light
OFF
ON
ON
ON
Head Light
Low
OFF
OFF
ON
OFF
High
OFF
OFF
OFF
ON
NOTE
The above lights are turned on or off by the light switch
regardless of starter switch position, so use this switch to
turn off the lights
HORN [9]
To give alarm to fellow worker(s) around and in the path
of your truck, press the rubber cover marked TCM a: the
center of the handwheel. The horn can be used
regardless of starter switch position.
2-3
|
