TM 10-3930-653-14&P DEFINITIONS Side Shift Carriage An  assembly  attached  to  the  lift  bracket  by  means  of  wear  strips  and  bushings  and  brackets  so  that  it  can  be  shifted laterally, by a hydraulic cylinder, four (4) inches left and right of center.  The forks are mounted on the side shift carriage. Upright The upright is made up of three (3) channel sets each welded together (by means of cross members) as a unit and then assembled one inside the other to form a telescopic assembly that is opened by hoist cylinders by means of chains over pulleys.  The final set of chains is hooked to the lift bracket or carriage. Lift Bracket (or Carriage) This assembly’s bearings ride inside of the third set of  channels.  It is lifted by chains which run over the top of sheaves on the cross-head of the free-lift cylinder.  The forks are mounted to the lift bracket’s side shifting finger bars and can be slid across their face to adjust the spacing. 1-2