TM 10-3930-653-14&P Fig. 4-182.  Inspecting Alternator (1)   ROTOR INSPECTION (1)   Continuity testing of rotor coil Apply  tester  between  slip  rings  of  rotor  as  shown  in Fig. 7-34. If  there  is  no  continuity,  an  "open"  in  the  field coil may exist Replace rotor assembly. Fig. 4-183.  Conduction Test of Rotor Coil (2)   Ground test of rotor coil Check continuity between slip ring and  rotor  core.  If continuity  exists.  replace  rotor  assembly.  because  field coil or slip ring may be grounded. Fig. 4-184.  Testing Rotor Coil For Ground (2)   INSPECTION OF STATOR (1)   Continuity Testing Stator  is  normal  when  there  is  continuity  between individual    stator    coil    terminals.    When    there    is    no continuity between individual terminals. cable is broken. Replace stator assembly. Fig. 4-185.  Testing Stator for Conduction 4-106