Figure 5-141. Blocking Carriage

Figure 5-141. Blocking Carriage

Figure 5-142. Fork and Carriage Blocking

CARRIAGE ASSEMBLY.

5 - 1 3 9 . REMOVAL.

a . Set parking brake and block drive wheels

securely.

b. Raise carriage about 4 feet. Place a 4 x 4 oak

beam or steel I-beam, 3 to 4 feet in length, upright

between carriage and floor and lower carriage until

it rests on the end of the beam. (See figure 5-141.)

Remove Hydraulic hoses from carriage.

c . Remove chain anchor pins from the bottom

bar of the lift carriage. Remove only one pin at a

5-99