INPUT SHAFT ASSEMBLY - continued - TM-10-3930-647-14-P0275

STEP 28. Check the oil distributor sleeve seals

with a flat type feeler gauge as Illustrated.

All three seals must not have more than a

MAXIMUM of .004 side clearance.

Step 28. Plate 10334

STEP 29. Carefully inspect the oil distributor

for ring wear and imbedded foreign material.

Normal ring wear will show up as a polished

surface free of ridges, rough spots, and grooves.

Ridges, rough spots and grooves will require

replacement of the distributor and sealing

rings.

STEP 30. Replace the old "0" ring seals in the

o i l d i s t r i b u t o r . Make sure seals are well

seated in the grooves.

Step 29. Plate 10335

Step 30. Plate 10376

5-80V