 |
|||
|
|
|||
|
Page Title:
Figure 5-63. Crankshaft End Play Check |
|
||
| ||||||||||
|
|
 Figure 5-65. Connecting Rod Orientation
Figure 5-63. Crankshaft End Play Check
j. If the housing alignment dowels are installed
in the cylinder block, coat the exposed ends with
non-hardening Permatex. If pins are removed
from the assembly, they will be installed in step
1.
k. Place the flywheel housing into position and
install fasteners, but do not tighten.
1. Coat the housing alignment dowels with
non-hardening Permatex and install as shown in
fasteners to
housing
all
m. Torque
specifications.
n. Install flywheel to crankshaft mounting
flange. Torque all fasteners to specifications, and
lockwire in pairs.
5-46. CRANKSHAFT END PLAY CHECK.
a. Force the crankshaft toward the rear of the
Figure 5-64. Flywheel Runout Check
engine.
b . Install a dial indicator so that the contact
point rests against the crankshaft gear, as shown
i. Coat the rear seal assembly with a light film
in figure 5-63.
of low temperature non-fibrous grease.
5-39
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals