 |
|||
|
|
|||
|
Page Title:
LUBRICATION AND PREVENTIVE MAINTENANCE |
|
||
| ||||||||||
|
|
 LUBRICATION AND PREVENTIVE MAINTENANCE
Parts can be ordered from the following
suppliers:
Relief Valve - Model 250V-l/4"
Humphrey Products
P.0. Box 2008
Kilgore at Sprinkle Rd.
Kalamazoo, Mich.
- lmperia1 #77E (1/4 to
Shut-Off
Valve
Kendall Industrial Supplies, Inc.
702 N. 20th St.
Battle Creek, Mich. 49016
Air Gauge - Marshal town #23 (160 lb,
1/4 1 PT, 2 1/2" diameter gauge)
Kendall Industrial Supplies, Inc.
702 N. 20th St.
Battle Creek, Mich. 49016
Safetv Cane
Typical Split Wheel
Plate 7613.
Meyers Tire Supplies
6400 Epworth Blvd.
seated prior to inflation. An inflated tire
Detroit, Mich.
contains potentially explosive energy that can
blow rings loose.
All wheel/tire assemblies should be inflated in
a safety cage. The air hose should have a
special set-up as shown in Plate 9702. The hose
should have an adapter so that it can be securely
fastened to the valve stem. Using this set-up
you would:
Attach air hose to valve stem.
1.
2. Open shut-off valve allowing compressed air
to enter tube.
3. Shut off air supply occasionally to check
pressure in tube at air gauge.
If pressure
4 . Inflate to proper capacity.
exceeds proper inflation capacity, depress the
relief valve to release excess air pressure.
5. This alternating procedure is followed until
S e e specifications.
proper inflation is reached
IMPORTANT
MAINTAIN UNIFORM INFLATION IN BOTH TIRES OF A
DUAL ASSEMBLY SO THAT WEIGHT IS EQUALLY SUSTAINED.
NEVER RE-INFLATE A TIRE THAT HAS GONE FLAT WITH-
OUT FIRST INSPECTING IT AND THE WHEEL ASSEMBLY.
The tire inflation arrangement as shown in
Plate 9702 can be made up from local suppliers.
4-52M
|
|
Privacy Statement - Press Release - Copyright Information. - Contact Us |
Click
here for thousands of PDF manuals