1 -SPEED AND 2-SPEED HYDRATORK TRANSMISSION CHECKS

1 -SPEED AND 2-SPEED HYDRATORK TRANSMISSION CHECKS

TRANSMISSION STALL AND PRESSURE CHECKS

Minimum Tools Required

1 - Pressure Gauge, 0 - 250 PSI

1 - Tachometer

IMPORTANT

Before making transmission checks, the machine should be:

1. Steam cleaned..... i t i s i m p o r t a n t t h a t t h e r a d i a t o r b e c l e a n e x t e r n a l l y

and internally so that it is capable of maintaining proper cooling for the engine

and transmission.

2. R u n m a c h i n e u n t i l u n i t i s a t o p e r a t i n g t e m p e r a t u r e . . . . t h i s i s i m p o r t a n t

as the transmission oil temperature should be 200 degrees F. to obtain accurate

readings; and, the transmission plumbing and torque converter must be fully

charged.

3. W ith the engine operating at idle and the transmission in NEUTRAL,

c h e c k t h e f l u i d l e v e l o n t h e d i p s t i c k . Fill if necessary to the FULL mark

on the dipstick.....using Type "A", Suffix "A" Automatic Transmission Fluid

(Clark Park Number 879803....fluid containers must display a qualification

number prefixed by "AQ-ATF").

4 . C h e c k p e d a l f r e e t r a v e l . . . . . the inching/brake pedal/s must be adjusted

c o r r e c t l y . . . . . refer to page 4-20 & 4-21 for procedure and specifications.

1-SPEED Transmission Control Cover

Plate 9220.

P-SPEED Transmission Control Cover

Plate 9774.

Cushion Tire Machines.

Pneumatic Tire Machines.

4-52