Figure 4-33. Pressure Bleeder Hook-up

Figure 4-33. Pressure Bleeder Hook-up

h. When air bubbles stop coming into the

k . When bleeding operation is completed, fill

container, close the bleeder fitting and remove the

both cylinders to within l/4 inch from the top.

tube. Close bleeder tank valve.

i. Disconnect bleeder tank line from master

cylinder and connect it to the inching master

cylinder.

Always relieve pressure from bleeder tank

j. Follow the same procedure as outlined above,

when bleeding operation is completed.

but start at bleeding point "A," shown in figure

4-36.

4-21. MANUAL BLEEDING. Manual bleeding

4-24