Appendix C. Maintenance Allocation Chart

TM 10-3930-644-14&P

APPENDIX C

Maintenance Allocation Chart

TRUCK, FORK LIFT, 4,000 LB. CAPACITY

GASOLINE ENGINE DRIVEN (Allis Chalmers)

MODEL ACP-40-PS MHE 234

NSN 3930-01-040-4594

(144" LIFT HEIGHT & PNEUMATIC TIRES)

MODEL ACC-40-PS MHE 232

NSN 3930-01-039-8291

(144" LIFT HEIGHT & SOLID RUBBER TIRES)

NSN 3930-01-039-8292

(180" LIFT HEIGHT & SOLID RUBBER TIRES)

SECTION I

INTRODUCTION

C-1 General

a. This section provides a general explanation of all maintenance and repair functions authorized at various

maintenance categories.

b. The Maintenance Allocation Chart (MAC) in section II designates overall authority and responsibility for the

performance of maintenance functions on the identified end item or component. The application of the maintenance

functions to the end item or component will be consistent with the capacities and capabilities of the designated

maintenance categories.

c. Section III lists the tools and test equipment (both special tools and com mon tool sets) required for each

maintenance function as referenced from section II.

d. Section IV contains supplemental instructions and explanatory notes for a particular maintenance function.

C-2 Maintenance functions. Maintenance functions will be limited to and defined as follows:

a. Inspect.

To determine the serviceability of an item by comparing its physical, mechanical, and/or electrical

characteristics with established standards through examination (e.g., by sight, sound, or feel).