| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE.
15-7.
Transmission Control Valve. (Sheet 8 of 9)
ASSEMBLY
35.
36.
37.
38.
39.
40.
41.
42.
Using snap
ring pliers, install
retaining ring (18) to plunger (19).
Install new preformed packing (17) in
plug (13).
NOTE
Secure eye end of plunger
jawed vise
with plunger
vertical position.
in soft
in
Install spring (16) and cam (15) in
plunger (19).
Hold four balls (14) in position in
plunger (19) with one hand.
position plug (13) on end of plunger
(19).
Push down over balls (14) with quick
downward movement.
Lubricate items 19 thru 13 as an
assembly in housing (32) with clean
transmission oil and install into
valve bore.
Using a 1-7/16” open end wrench,
tighten plug (13).
Go to sheet 9
15-93
|
