| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE. (cont)
15-7.
Transmission Control Valve. (Sheet 3 of 9)
DISASSEMBLY (cont)
7.
8.
9.
10.
11.
12.
13.
14.
15.
16.
17.
Using a 1-7/16” open end wrench,
unscrew plug (13) from housing (32).
Do not remove plug (13).
Push items 13 thru 19 as an assembly
out of housing (32).
Plug (13) and
plunger (19) must remain attached.
Wrap clean cloth entirely around
plunger (19) and carefully separate
plug (13), four balls (14), cam (15)
and spring (16) from plunger
(19).
Balls (14), cam (15) and spring (16)
will drop into cloth.
Remove and discard preformed packing
(17).
Using snap
ring pliers, remove
retaining ring (18)
from plunger
(19).
Using an 1-7/16” open end wrench,
unscrew plug (20) from housing (32).
Push items 20 thru 27 as an assembly
out of housing (32).
Plug (20) and
plunger (27) must remain attached.
Wrap clean cloth entirely around
plunger (27) and carefully separate
plug (20), four balls (21), cam (22)
and spring (23) from plunger (27).
Balls (21), cam (22) and spring (23)
will drop into cloth.
Using flat tip screwdriver, remove
plug (24).
Remove and discard preformed packing
(25) from plug (20).
Using snap
ring pliers,
remove
retaining ring (26)
from plunger
(27).
Go to sheet 4
15-88
|
