TM  10-3930-643-34 GENERAL  SUPPORT  TRANSMISSION  MAINTENANCE. 15-6. Forward and Reverse Steering Gear Assembly. (Sheet 13 of 13) ASSEMBLY 88. 89. 90. 91. 92. 93. 94. 95. 96. 97. 98. Install gear (7) on shaft (40). Turn gear back and forth to aline teeth. Install two bearings (8) in gear (7). Install two washers (5) and thrust washer (6). Install spacer (4) and bearing (3). Using snap ring pliers, install new retaining ring (2). Install three new seal rings (1). Install gear (14) on shaft (40) at reverse gear side. Turn gear back and forth to aline teeth. Install two bearings (15) in gear (14). Install two washers (12) and thrust washer (13). Install spacer (11) and bearing (10). Using snap ring pliers, install new retaining ring (9). NOTE Return  M10A  Forklift equipment  condition. to  original END OF TASK 15-85