| |
TN 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE. (cont)
15-6.
Forward and Reverse Steering Gear Assembly. (Sheet 8 of 13)
ASSEMBLY (cont)
NOTE
Wait until shaft and cylinder
assembly is
cool
before
continuing.
50.
51.
52.
53.
54.
55.
56.
57.
Using a plastic hammer, install pin
(43) in shaft (40). Must be flush in
shaft (40).
Install new preformed packing (38)
and new seal ring (39) on piston
(37).
Coat piston (37) with clean lubri-
cating oil.
Insert piston (37) in cylinder (41)
with new preformed packing
(38)
entering cylinder first.
Using a plastic hammer, tap piston
(37) into place.
Turn shaft {40) over.
Install new preformed packing (34)
and new seal ring (35) on piston
(33).
Coat piston (33) with clean lubri-
cating oil.
Go to sheet 9
15-80
|
