| |
TN 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE.
15-4.
First Gear Assembly. (Sheet 5 of 7)
CLEANING/INSPECTION
15.
Inspect teeth on gear (2), housings
(9 and 15) and plates (4 thru 6) for
wear, chips, cracks or
missing
teeth.
Replace, if necessary.
16.
Inspect all other parts. Refer to
paragraph 2-9.
ASSEMBLY
17.
Install new retaining ring
(8) in
housing (15). Be sure that open
space between retaining ring (8) ends
does not aline with oil holes.
18.
Install housing (9) in housing (15).
19.
Install two races (11) and thrust
bearing (10).
20.
Install new preformed packing
(13)
and new seal ring (14) on piston
(12).
21.
Install piston (12) in housing (15).
22.
Place housing (15) in an arbor press.
Go to sheet 6
15-53
|
