| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE.
15-1.
Torque Converter. (Sheet 10 of 15)
ASSEMBLY
52.
53.
54.
55.
56.
NOTE
Seal is a double lip seal. Large
lip with spring tensioner must
face housing interior.
Using an arbor press, press new seal
(56) into housing (13).
Use an
output shaft oil seal installation
tool ,
refer to App. D,
for
fabrication of an output shaft oil
seal installation tool.
Lubricate I.D. of new seal (56) with
grease.
Bearing inner race must be
supported
during
pressing
operation.
Using an arbor press, press retainer
(54) into bearing (53).
Press items 53 and 54 as an assembly
into gear (55).
Be sure pressure
from arbor press is exerted on
bearing (53) outer race.
Using snap ring pliers, install ring
(52) onto gear (55).
Go to sheet 11
15-11
|
