| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE. (cont)
15-1.
Torque Converter. (Sheet 9 of 15)
CLEANING/INSPECTION (cont)
43•
Inspect housings (13 and 40)
for
cracks, Check bearing bores and
mounting faces for wear, grooves or
scratches.
Remove minor burrs and
scratches with crocus cloth.
44.
Inspect impeller (22), guide wheel
(25) and turbine (38) for cracks or
other damage.
45.
Inspect yoke (4), guide wheel (27),
gear (33), hub (43), gear (48), hub
(50) and gear (55) for worn, twisted,
chipped or burred teeth.
Remove
burrs with soft stone.
NOTE
All parts must be free of metal
shavings and foreign material.
46.
Inspect all other parts. Refer to
paragraph 2-9.
ASSEMBLY
47.
Using a 9/16" open end wrench,
install plug (62) to connector (60).
48.
Using a 1-1/2" socket and socket
wrench handle, install new preformed
packing (61) and connector (60) to
housing (13).
49.
Install new preformed packing (59)
and plug (58).
50.
Using snap ring pliers, install ring
(57).
51.
Apply Permatex No. 2 to O.D. of new
seal (56).
Go to sheet 10
15-10
|
