| |
TM 10-3930-643-34
GENERAL SUPPORT TRANSMISSION MAINTENANCE.
15-1.
Torque Converter. (Sheet 4 of 15)
DISASSEMBLY
13.
14.
15.
16.
17.
Turn impeller (22) over. Using a
5/16"-12 point socket and socket
wrench handle, remove six bolts (23)
and two clamps (24) from impeller
(22).
Remove guide wheel (25) from impeller
(22).
Two wooden wedges may be used
on each side of guide wheel (25) to
pry it off evenly.
Separate carrier (26) from impeller
(22).
Remove piston ring (27) from carrier
(26).
Using slip joint pliers, squeeze split
sleeve (28) and remove from carrier
(26).
NOTE
It is not necessary to remove
spring pins 29 and 30 unless the
carrier (26) is being replaced.
18.
Remove four spring pins (29 and 30)
from carrier (26) if necessary.
Go to sheet 5
15-5
|
