| |
GENERAL
13-14.
TM 10-3930-643-34
SUPPORT ENGINE, FUEL, EXHAUST AND COOLING MAINTENANCE.
Turbocharger.
(Sheet 8 of 10)
ASSEMBLY
35.
36.
37.
38.
39.
40.
41.
42.
Lubricate bearing (26) with engine
oil. Using external snap ring
pliers, install new retaining ring
(27), bearing (26) and new retaining
ring (25) in center housing (28).
Lubricate bearing (23) with engine
oil. Using external snap ring
pliers, install new retaining ring
(24), bearing (23) and new retaining
ring (22).
Using a flat brass punch, install new
piston ring (21).
Position shroud (12) over turbine end
of center housing (28).
Install wheel assembly (10) through
shroud (12) and center housing (28).
Using a flat brass punch, install new
piston ring (20) into thrust collar
(17).
Install thrust bearing (18).
Install thrust collar (17) over shaft
of wheel assembly (10) in center
housing (28) with thrust bearing (18)
first.
Go to sheet 9
13-93
|
