| |
TM 10-3930-643-34
GENERAL SUPPORT ENGINE, FUEL, EXHAUST AND COOLING MAINTENANCE. (cont)
13-4.
Crankshaft. (Sheet 4 of 9)
REMOVAL (cont)
5.
6.
7.
8.
9.
Place crankshaft (8) on wood blocks
to prevent damage to journals.
Remove hoist and sling.
Support nose of crankshaft (8) with
wood blocks.
Using a chisel and hammer,
separate
and remove gears (9 and 10).
Discard
gears (9 and 10).
Using a flat brass punch and hammer.
remove pin (11) from crankshaft (8).
Discard pin (11).
Exercise care when removing wear
sleeve.
Do not damage crankshaft
surface.
10.
Using a muffler tool, remove wear
sleeve (12) from
crankshaft (8).
Discard wear sleeve (12).
Go to sheet 5
13-28
|
