| |
TM 10-3930-643-34
GENERAL SUPPORT ENGINE, FUEL, EXHAUST AND COOLING MAINTENANCE. (cont)
13-3.
Crankcase and Cylinder Sleeves. (Sheet
DISASSEMBLY (cont)
NOTE
Make sure that each sleeve is
marked with the number of
the
cylinder
from which it was
removed.
Sleeves
must be
installed into
their
original
cylinders.
10.
Using a universal wet sleeve puller,
remove six
sleeves (16). If
necessary, thread a slide hammer into
the forcing screw to aid removal.
11.
12.
Using a flat brass punch and hammer,
remove and discard six shims (17).
Using a small flat tip screwdriver,
remove and discard 18 preformed
packings (18) from six sleeves (16).
3 of 11 )
Go to sheet 4
13-16
|
