| |
TM 10-3930-643-34
HYDRAULIC SYSTEM TROUBLESHOOTING AND MAINTENANCE.
12-16.
Fork Position Cylinders (S/N 2001 and above). (Sheet 7 of 10)
ASSEMBLY
28.
Coat retainer (31), shaft (35) and
new seal (30) with clean
hydraulic
fluid.
29.
Coat new seals (34 and 33) and new
wiper (32)
with
clean hydraulic
fluid.
30.
Install seals (34 and 33) on retainer
(31).
Use suitable seal installer,
if necessary.
Lip on seal (33) is to
face inside cylinder.
31.
Install new wiper seal (32) on
retainer (31).
32.
Install items (34 thru 31) on shaft
(35) .
33.
Coat new seal (30), new strip (29),
new preformed packing (28) and new
seal (27) with clean hydraulic fluid.
34,
Install new seal (30), new strip
(29), new preformed packing (28) and
new seal (27) on piston (26).
Use
suitable seal expander, if necessary.
35.
Coat piston (26) with clean hydraulic
fluid.
36.
Install items (30 thru 26) on shaft
(35).
37.
Using a 14" adjustable wrench,
install nut (25).
38.
Coat
with
inside of barrel (24) liberally
clean hydraulic fluid.
Co to sheet 8
12-148
|
