TM 10-3930-643-34 HYDRAULIC  SYSTEM  TROUBLESHOOTING  AND  MAINTENANCE.  (cont) 12-14. Sideshift Cylinder (S/N 2001 and above). (Sheet 7 of 11) CLEANING/INSPECTION l TOXIC/FLAMMABLE 28. Dry  cleaning  solvent  P-D-680,  used for cleaning parts, is toxic and flammable.  Use  only  in  well ventilated areas. Wear protective goggles and gloves. Do not smoke or allow open flames or sparks in areas where cleaning solvent is used or stored. Avoid contact with eyes, skin or clothing. If contact with eyes is made, flush with cold water and seek medical attention  immediately. If contact with skin or clothing is made, flush with cold water. If you become  dizzy  while  using  cleaning solvent, get fresh air immediately. l COMPRESSED AIR HAZARD Compressed air used for cleaning purposes will not exceed 30 psi. Use only with effective chip guarding and personal protective equipment  (goggles/shield,  gloves, etc.). Clean  all  parts  with  cleaning  solvent P-D-680. Dry  thoroughly  with compressed air. Refer  to  paragraph 2-8. Go to sheet 8 12-127

Integrated Publishing, Inc. - A (SDVOSB) Service Disabled Veteran Owned Small Business